-
DescriptionLei Teng R70 small field crossing machine 1S power input simulation lens, the crossing machine adopts Galleon series G0802 25000KV brushless motor as the main power, equipped with F4 1S 6A AIO Whoop flight controller, 5.8G 25/200/400mW image transmission, Caddx Ant Lite 1/3'' CMOS 1.8mm 1200TVL camera Qianfeng Tiny Whoop 40MM 1610-2 Two leaves, the overall structure of the product is a split combination to reduce the damage cost caused by the crash.
Specification :
Brand: SPCMAKER
Model: R70
Wheelbase: 70mm
Flight control: SPCMAKER F4 1S 6A AIO Whoop flight controller
Motor: Galloping G0802 25000KV brushless motor
Propeller: Qianfeng Tiny Whoop 40MM 1610-2 two blades
Camera: CADDX Nano ANT Lite 1200TVL camera
Image transmission: 5.8g 25/400MW 40CH image transmission
Receiver: Frsky/DSMX/Flysky/Futaba/ELRS 2.4G (optional)
Product size: 86mm*86mm*55mm
Weight: 23.5g (without receiver)
Package size: 62.9x62.9x48mm
Weight: 120g
Brushless Motor :
Brand: SPCMAKER
Model: Galloping G0802 25000KV brushless motor
Working rated voltage (Lipo): 1S
No-load current (4.0V): 1.0A
Current on-line: 5.0A
Power Limit: 20W
Phase-to-phase internal resistance: about 160mΩ
Lead wire specification: 30#AWG 35mm JST1.25
Groove rod: 9N12P
Shaft diameter: 1.5mm
Size: φ10.5*7.6mm
Weight (including wire): 2g
Flight Controller:
Microcontroller: STM32F411
Gyroscope: MPU6000
Screen display: AT7456E
Size: 31.5*31.5mm
Mounting hole: 25.5*25.5mm/φ3mm
Weight: 3g
BEC output: 5V 1.2A
FC firmware: MatekF411RX
ESC firmware: O_H_5
BLHeli BLHeli-S
Input voltage: 1S
Current: 6A continuous (8A peak)
Current size: 400
Camera :
Model: Caddx Ant lite
Image sensor: 1/3" CMOS sensor
Horizontal Resolution: 1200 TVL
TV system: NTSC and PAL (switchable)
menu: support
Image: 4:3
Sync: Internal
Electronic shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
Signal-to-noise ratio: >52dB (AGC off)
Video output: CVBS
Lens: 1.8mm/F2.5
Minimum illumination: 0.001Lux
Automatic Gain Control: Yes
BLC: yes
WDR: Global WDR
DNR: 3D DNR
Size: 14*14mm
Wide power input: DC 3.7-18V
Operating temperature: -20°C~+60C
Working humidity: 20%~80%
Weight: 1.7 g (net)
Image transmission:
Working voltage: 5V
Output power: 25mW/50mW/100mW/200mW/400mW
Frequency: 5.8GHz 40CH
Video format: NTSC/PAL
ratio mode
OSDs that support RCDRone
Connector: UF.L(IPE-X)
Dimensions: 15mmx15mmx3mm (without mounting holes)
Mounting hole: 16mmx16mm
Weight: 1.5g
propeller:
Model: 40mm-2
Number of paddles: 2
Material: PC
Pitch: 1in
Paddle diameter: 40MM
Center thickness: 5MM
Inner diameter of center hole: 1mm
Maximum blade width: 8MM
Weight: 0.241g
Recommended motor: 0802 1102
Delivery configuration checklist:
1x Leiteng R70 Kit
1X SPCMAKER F4 1S 6A AIO Whoop Flight Controller
1X 5.8G 25/100/200/400MW 40CH video transmission
1X CADDX Nano ANT Lite 1200TVL Camera
4x Galloping G0802 25000KV brushless motors
8X Tiny Whoop 40MM 1610-2 Two Leaves
1X 5.8g UFL Interface Rod Antenna
1X Frsky/DSMX/Flysky/Futaba/ELRS 2.4G (optional)
1X PH2.0 Plug 24AWG High Temperature Silicone Wire
1X packing color box -
Size Chart
-
Measurement
-
Color Chart
Please be aware that due to your computer monitor display the color may have some difference between the picture and the physical item
Please according to you to buy the dress fabric, select the corresponding fabric color chart
-
Product reviews can be carried out after the member login, please click here to login