Leiteng R115 3-inch 1S power input analog lens traversing machine, using Chifeng series 1202 11000KV brushless motor as the main power, equipped with F4 1S 6A AIO Whoop flight controller, 5.8G 25/200/400mW video transmission Caddx Ant Lite 1/ 3'' CMOS 1.8mm 1200TVL camera, HQProp T 3X2-PC 3-inch propeller, the overall structure of the product is a split combination to reduce the damage cost caused by the crash.

Specification :
Brand: SPCMAKER
Model: Leiteng R115
Wheelbase: 115mm
Flight control: SPCMAKER F4 1S 6A AIO Whoop flight controller
Motor: Galloping G1202 11000KV brushless motor
Propeller: HQProp T 3X2-PC 3 inch propeller
Camera: CADDX Nano ANT Lite 1200TVL camera
Image transmission: 5.8g 25/400MW 40CH image transmission
Receiver: Frsky/DSMX/Flysky/Futaba/ELRS 2.4G (optional)
Product size: 100mm*100mm*42mm
Weight: 39.8g (without receiver)
Packing size: 150x150x60mm
Weight: 185g

Brushless Motor :
Brand: SPCMAKER
Model: Galloping G1202 KV11000 Brushless Motor
Working rated voltage (Lipo): 1S
No-load current (4.0V): 1.3A
Online current: 5.31A
Power Limit: 21.24W
Phase-to-phase internal resistance: 160mΩ
Lead specification: 30#AWG 48mm JST1.25
Groove rod: 9N12P
Shaft diameter: 1.5mm
Size: φ15.5*8.5mm
Weight (including wire): 3.6g
Flight Controller:
Microcontroller: STM32F411
Gyroscope: MPU6000
Screen display: AT7456E
Size: 31.5*31.5mm
Mounting hole: 25.5*25.5mm/φ3mm
Weight: 3g
BEC output: 5V 1.2A
FC firmware: MatekF411RX
ESC firmware: O_H_5
BLHeli BLHeli-S
Input voltage: 1S
Current: 6A continuous (8A peak)
Current size: 400

camera :
Model: Caddx Ant lite
Image sensor: 1/3" CMOS sensor
Horizontal Resolution: 1200 TVL
TV system: NTSC and PAL (switchable)
menu: support
Image: 4:3
Sync: Internal
Electronic shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
Signal-to-noise ratio: >52dB (AGC off)
Video output: CVBS
Lens: 1.8mm/F2.5
Minimum illumination: 0.001Lux
Automatic Gain Control: Yes
BLC: yes
WDR: Global WDR
DNR: 3D DNR
Size: 14*14mm
Wide power input: DC 3.7-18V
Operating temperature: -20°C~+60C
Working humidity: 20%~80%
Weight: 1.7 g (net)
Image transmission:
Working voltage: 5V
Output power: 25mW/50mW/100mW/200mW/400mW
Frequency: 5.8GHz 40CH
Video format: NTSC/PAL
ratio mode
OSDs that support RCDRone
Connector: UF.L(IPE-X)
Dimensions: 15mmx15mmx3mm (without mounting holes)
Mounting hole: 16mmx16mm
Weight: 1.5g

propeller:
Brand: HQProp
Model: HQProp T 3X2-PC
Material: PC
Length: 3 inches, about 76.2mm (mm)
Color: transparent black
Quantity: 2 positive + 2 negative = 1 set
Aperture: 1.5mm
Weight: 3.8g (4 pieces.)
Lightweight, sturdy, balanced toothpick drone


Delivery configuration checklist:
1x Leiteng R115 Kit
1X SPCMAKER F41S 6A AIO Whoop Flight Controller
1X 5.8g 25/100/200/400MW 40CH Image Transmission
1X CADDX Nano ANT Lite 1200TVL Camera
4x Galloping G1202 11000KV brushless motors
4X HQProp T 3X2-PC 3" Propeller
1X 5.8g UFL Interface Rod Antenna
1X Frsky/DSMX/Flysky/Futaba/ELRS 2.4G (optional)
1X PH2.0 Plug 24AWG High Temperature Silicone Wire
1X packing color box